Sea..

Z-Uno 2 Shield is a configurable multipurpose Z-Wave device. It can act as a sensor, as an actor or as a gate to popular buses like UART/RS-485/1-Wire and others. Z-Uno 2 Shield inherits the flexibility
of Z-Uno and at the same time is very easy to use. It was designed to simplify Z-Uno usage in many typical installations. Being included in a Z-Wave controller Z-Uno 2 Shield will be detected as several sensors/actors depending on the configuration (each in it’s own end point, also called channel).
No soldering required!
Z-Uno 2 Shield is very easy to wire. It allows to connect many smart home actors and sensors out of the box:

• Four 0-10 V analog outputs — control industrial dimmers
• Up to four PWM or switch outputs (up to 5 A per channel) — control contactors, switches, halogen bulbs or LED strips
• Up to eight digital 0/3 V inputs or outputs — connect various low voltage digital sensors and actors
• Up to four digital 0/3, 0/5 or 0/12 V digital or analog inputs — connect industrial 10 V sensors or any Arduino-compatible sensor
• RS485 or UART — for industrial meters
• OneWire — for DS18B20 or other sensors

For those who still want to solder something there is a bread board for your additional components.

No programming required!
We have created the Z-Uno Shield Configurator that will not only help you to wire your Z-Uno Shield correctly, but will also write the Z-Uno sketch for you. Most popular cases are covered by this tool. You can still modify the generated code or write your own sketch.
Z-Uno Shield Configurator allows to create:

• Dimmers and Blinds
• Switches, Sirens, Valve controls and Door locks
• Sensors
• Thermostats

Z-Uno Shield comes in DIN-rail case or Sealed case and have terminal strips for easy connection.
Multifunctional DIN-rail/Sealed smart home device based on Z-Uno 2
Allows to create: Dimmers and Blinds; Switches, Sirens, Valve controls and Door locks; Sensors; Thermostats.
No soldering required
No programming required